O projeto e a qualidade das sondas e sistemas de apalpadores têm uma influência decisiva nas medições em metrologia tátil. Quer sejam pontas esféricas de rubi a diamante, pontas de disco ou pontas de estrela: com mais de 7.000 pontas em sua linha, a ZEISS fornece sistemas de pontas inteiros da mais alta qualidade de uma única fonte. Você tem a garantia de encontrar a melhor solução para seus processos de medição e peças de trabalho – e nossos especialistas em metrologia ficarão felizes em aconselhá-lo na escolha da ponta certa.
É por isso que os apalpadores da ZEISS são tão especiais:
- Precisão: nossos apalpadores permitem medições precisas e fornecem resultados reproduzíveis com a mais alta precisão.
- Qualidade: Graças às tecnologias de produção mais recentes, nossos apalpadores são particularmente precisas, estáveis e duráveis.
- Excepcional: nossos apalpadores ZEISS M3 XXT alcançam maior rigidez geral do sistema em comparação com os apalpadores de prova de medição M3 convencionais.
- Rápido e fácil: graças ao nosso excepcional portfólio de apalpadores padrão e à oficina de metrologia ZEISS, você pode obter os apalpadores de que precisa sempre que precisar.
- Variedade: Com nossos apalpadores especiais você pode medir tudo. Além de pontas esféricas, você também encontrará apalpadores em forma de estrela, apalpadores de cilindro e apalpadores em T, bem como muitos
- Qualidade ZEISS garantida com cada uso de apalpador.
- Reconhecendo a Qualidade.
- Tecnologias de produção aprimoradas.
A qualidade faz a diferença: os apalpadores podem ser pequenas, mas são a parte de uma máquina de medição por coordenadas que toca a peça a ser medida e executa medições altamente precisas por meio da respectiva ponta da sonda de medição.
Sondas de qualidade inferior podem ter uma influência significativa na precisão da medição. Isso pode resultar em erros de medição significativos e, portanto, em um aumento nas taxas de refugo. A vida útil dos apalpadores também é significativamente influenciada pela qualidade. Este problema pode ser evitado de forma eficaz com apalpadores ZEISS de alta qualidade.
Como você pode reconhecer a mais alta qualidade do apalpador? A olho nu, é difícil – mas sob o microscópio, muitas vezes há uma diferença clara. A qualidade de uma sonda de medição é particularmente evidente no acabamento da superfície e no design das juntas. Entre outras coisas, este é um fator decisivo para determinar por quanto tempo você pode medir resultados precisos com a mesmo apalpador. A qualidade também inclui a maior rigidez possível da ponta, a precisão geométrica do elemento da ponta e a circularidade máxima da esfera da sonda de medição. Os rígidos controles de processo da ZEISS na fabricação garantem a qualidade dos apalpadores do mais alto nível.
As tecnologias mais recentes, como soldagem e processamento a laser, bem como o uso de materiais de alta qualidade, aumentam enormemente a vida útil da qualidade dos apalpadores em comparação com os processos de fabricação convencionais. Isso economiza recursos valiosos e permite que você entregue produtos perfeitos aos seus clientes. Resultados de medição confiáveis com alta repetibilidade são, portanto, garantidos por um longo tempo – e as sondas de medição de alta precisão são fornecidas com um certificado como garantia da exatidão prometida.
Saiba mais sobre Apalpador com
#measuringhero
Os Apalpadores não são apenas compostas por vários componentes, mas também fazem parte de um sistema de pontas inteiro. Em combinação com CMMs e os elementos de conexão, extensões, suportes ou inserções de fixação, os apalpadores fornecem resultados de medição com a mais alta precisão e repetibilidade com qualidade ZEISS confiável. Saiba mais sobre o papel dos apalpadores e as etapas na produção de apalpadores com nosso.
#measuringhero!
Sistemas compatíveis:
ZEISS ACCURA
Sob medida para suas necessidades.
ZEISS CONTURA
Preparado para todos os desafios de hoje e amanhã.
Preparado para todos os desafios de hoje e amanhã.
ZEISS MICURA
Estabelece padroes no segmento compacto.
Estabelece padroes no segmento compacto.
ZEISS PRISMO
Scanning em alta velocidade e precisão máxima.
Scanning em alta velocidade e precisão máxima.
ZEISS XENOS
Máquina de medição high-end para presisão máxima.
Máquina de medição high-end para presisão máxima.
Encontre o kit de apalpador certo para a sua máquina de medição por coordenadas ZEISS.
Conheça os detalhes do Styli KIT:
| Thumbnail | SKU | Name | Categories | Summary | Buy |
|---|---|---|---|---|---|
 | 626103-0302-020 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, ruby sphere, DK: 3, L: 20, ML: 11, DS: 2, DG: 5, weight: 0.8 g | |
| 626103-0302-030 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, ruby sphere, DK: 3, L: 30, ML: 21, DS: 2, DG: 5, weight: 0.9 g | |
| 626103-0302-040 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, ruby sphere, DK: 3, L: 40, ML: 31, DS: 2, DG: 5, weight: 1 g | |
 | 626103-0312-020 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 40, ML: 11, DS: 2, DG: 5, weight: ... | |
| 626103-0312-030 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 40, ML: 21, DS: 2, DG: 5, weight: ... | |
| 626103-0312-040 | 1/4 Stylus | Styli | M3 XXT system, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 40, ML: 31, DS: 2, DG: 5, weight: ... | |
 | 626105-6271-001 | Adapter for ball disk | Styli | M5, DS: 8, DG: 8, weight: 6.2 g, (Two pin spanner included) | |
 | 626105-6271-002 | Adapter for ball disk | Styli | M5, stainless steel, DS: 16, DG: 16, (Two pin spanner included) | |
 | 626119-0001-100 | Adapter plate bundle VAST consisting of 10 pieces adapter plates VAST (600667-9601-000) | Styli | Item price already reduced and not combinable with other Discunts. | |
 | 626119-0001-101 | Adapter plate bundle VAST consisting of 10 pieces stylus holder ZSH-28-A-0-M3 for VAST XXT TL1 (6201... | Styli | Item price already reduced and not combinable with other Discunts. | |
| 626119-0001-102 | Adapter plate bundle VAST consisting of 10 pieces stylus holder ZSH-28-B-0-M3 for VAST XXT TL3 (6201... | Styli | Item price already reduced and not combinable with other Discunts. | |
| 626119-0001-103 | Adapter plate bundle VAST consisting of 25 pieces adapter plates VAST (600667-9601-000) | Styli | Item price already reduced and not combinable with other Discunts. | |
| 626119-0001-104 | Adapter plate bundle VAST consisting of 25 pieces stylus holder ZSH-28-A-0-M3 for VAST XXT TL1 (6201... | Styli | Item price already reduced and not combinable with other Discunts. | |
| 626119-0001-105 | Adapter plate bundle VAST consisting of 25 pieces stylus holder ZSH-28-B-0-M3 for VAST XXT TL3 (6201... | Styli | Item price already reduced and not combinable with other Discunts. | |
 | 600660-8251-000 | Adapter plate for ST probe head | Styli | Weight: 157 g, set of 2 | |
 | 626107-2000-940 | Adapter plate VAST | Styli | M5 Thread without cube, direct connection, ThermoFit Pro system, weight: 139 g | |
 | 626107-2070-911 | Adapter plate VAST | Styli | M5 Thread with cube, ThermoFit system, MLE: 96.5, DGE: 20, LE: 70, BE: 180 | |
 | 626107-2070-950 | Adapter plate VAST with 8-sided Titaniumium cube | Styli | MLE: 110.5, DG: 29, DGE: 20, LE: 70, B: 15, weight: 200 g | |
 | 626107-2000-961 | Adapter plate VAST with cube | Styli | ThermoFit Pro, weight: 160 g | |
 | 626107-2070-951 | Adapter plate VAST with multiple styli holder | Styli | MLE: 116.5, DG: 20, LE: 70 | |
 | 600664-9700-000 | Adapter plate VAST XTR with T-adapter | Styli | B: 20 | |
  | 626103-8031-053 | Adapter plate VAST XXT TL1 | Styli | With extension and cone receiver ZSH-28-A-53-CR-TL1, L: 53, DG: 5, weight: 5.5 g | |
| 626103-8031-075 | Adapter plate VAST XXT TL1 | Styli | With extension and star element, L: 75 | |
 | 620161-8055-000 | Adapter plate VAST XXT TL1 | Styli | ZSH-28-A-0-M3, weight: 4.6 g | |
  | 626103-8031-055 | Adapter plate VAST XXT TL3 | Styli | With extension ZSH-28-A-55-5X-TL1-M3, L: 55, weight: 6.26 g | |
| 626103-8033-053 | Adapter plate VAST XXT TL3 | Styli | With extension and cone receiver ZSH-28-A-53-CR-TL3, L: 53, DG: 5, weight: 5.5 g | |
| 626103-8033-055 | Adapter plate VAST XXT TL3 | Styli | With extension ZSH-28-B-55-5X-TL3-M3, weight: 6.2 g | |
  | 626103-8033-075 | Adapter plate VAST XXT TL3 | Styli | With extension ZSH-28-B-75-5X-TL3-M3, L: 75, weight: 6.33 g | |
| 620161-8075-000 | Adapter plate VAST XXT TL3 | Styli | ZSH-28-B-0-M3, weight: 4.6 g | |
| 626103-8032-076 | Adapter plate VAST XXT TL4/TL2 | Styli | With extension and cone receiver ZSH-28-B-76-CR-TL2, L: 76, DG: 5, weight: 5.8 g | |
| 600667-9601-000 | Adapter plate with cube to accommodate styli and extensions. | Styli | 158 g | |
 | 626107-7000-961 | Adapter plate XTR with cube | Styli | ThermoFit Pro, BE: 20, weight: 220 g | |
 | 602030-8341-000 | Adapter/reduction | Styli | M3 bolt, M2 drill hole, L: 5, DG: 4, weight: 0.5 g | |
 | 602030-8345-000 | Adapter/reduction | Styli | M2 bolt, M3 drill hole, L: 5, DG: 4, weight: 1 g | |
 | 000000-1049-178 | Adapter/reduction | Styli | M2 bolt, M3 drill hole, L: 7, DG: 4, weight: 0.5 g | |
 | 626120-0207-000 | Adapter/reduction M4 bolt | Styli | M3 drill hole, steel , L: 9 | |
 | 602030-0215-000 | Adapter/reduction M5 bolt | Styli | M2 drill hole, L: 10, DG: 11, weight: 5 g | |
 | 602030-0315-000 | Adapter/reduction M5 bolt | Styli | M3 drill hole, L: 10, DG: 11, weight: 5 g | |
 | 602030-0318-000 | Adapter/reduction M5 bolt | Styli | M4 drill hole, L: 10, DG: 11, weight: 5 g | |
 | 626109-9140-120 | Alignment pins are screwed into cubes | Styli | Angle pieces and knuckle joints and used to adjust the different angles by aligning into a notch. | |
 | 626109-9170-010 | Angle adjustment tool, DG: 11 | Styli | | |
| 626109-9170-020 | Angle adjustment tool, DG: 20 | Styli | | |
 | 626103-6020-000 | Angle piece (with cone adapter) | Styli | Titaniumium, L: 7.75, ML: 4, DG: 5, weight: 1 g | |
 | 626107-6020-000 | Angle piece with cone adapter | Styli | Titaniumium, L: 16, ML: 10, DG: 11, weight: 11 g | |
 | 626101-3000-002 | Ball Disk | Styli | M5 thread, DK: 30, DS: 8, B: 2, weight: 5.2 g | |
 | 626101-6000-004 | Ball Disk | Styli | M5 thread, DK: 60, DS: 8, B: 4, weight: 4.3 g | |
  | 626107-6022-000 | Blank angle block long | Styli | ThermoFit Pro System, Titaniumium, L: 43, ML: 35, weight: 25 g | |
   | 626107-6021-000 | Blank angle block short | Styli | ThermoFit Pro System, Titaniumium , L: 25, ML: 17, weight: 18 g | |
  | 626107-6023-000 | Blank double angle | Styli | ThermoFit Pro system, ML: 10, DG: 11, weight: 18 g | |
  | 600341-0140-000 | Clamp disk for star probe | Styli | L: 1.5, DS: 5, DG: 11, weight: 1 g | |
| 600341-0141-000 | Clamp disk for star probe | Styli | L: 1.9, DS: 5, DG: 19, weight: 4 g | |
  | 626103-0301-060 | Clamp stylus with thread | Styli | M3 XXT, ThermoFit shaft, ruby sphere, DK: 3, ML: 51, DS: 2, DG: 5, LE: 70, weight: 1.12 g | |
| 626103-0301-070 | Clamp stylus with thread | Styli | M3 XXT, ThermoFit shaft, ruby sphere, DK: 3, ML: 61, DS: 2, DG: 5, LE: 70, weight: 1.12 g | |
| 626103-5020-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 21, weight: 1.23 g | |
| 626103-5025-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 26, weight: 1.29 g | |
| 626103-5030-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 31, weight: 1.35 g | ||
| 626103-5040-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 41, weight: 1.46 g | ||
| 626103-5050-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 51, weight: 1.57 g | ||
| 626103-5060-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 61, weight: 1.69 g | ||
| 626103-5070-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 71, weight: 1.8 g | ||
| 626103-5080-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 81, weight: 1.91 g | ||
| 626103-5100-005 | Clamping extension with cone receiver | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 101, weight: 2.14 g | ||
| 626103-5020-010 | Clamping extension with thread | Styli | M3 XXT, ThermoFit, DGE: 5, LE: 20, weight: 1.3 g | ||
| 626103-5045-010 | Clamping extension with thread | Styli | M3 XXT, ThermoFit, DSE: 5, LE: 45, weight: 1.47 g | ||
| 626103-0301-020 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, ruby sphere, DK: 3, L: 20, ML: 11, DS: 2, DG: 5, weight: 0.7 g | |
| 626103-0301-030 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, ruby sphere, DK: 3, L: 30, ML: 21, DS: 2, DG: 5, weight: 0.7 g | |
| 626103-0301-040 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, ruby sphere, DK: 3, L: 40, ML: 31, DS: 2, DG: 5, weight: 0.8 g | |
 | 626103-0311-020 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 20, ML: 11, DS: 2, DG: 5, weigh... | |
 | 626103-0311-030 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 40, ML: 21, DS: 2, DG: 5, weigh... | |
| 626103-0311-040 | Clamping stylus | Styli | M3 XXT, straight, ThermoFit shaft, silicon nitride sphere, DK: 3, L: 40, ML: 31, DS: 2, DG: 5, weigh... | |
| 626115-5000-059 | Clamping stylus | Styli | M5 thread, steel shaft, tungsten carbide sphere, DK: 0.3, L: 75, ML: 62, DS: 5, DSE: 0.2, DG: 11, B:... | |
| 626115-5000-548 | Clamping stylus | Styli | M5 thread, steel shaft, ruby sphere, DK: 0.5, L: 60, ML: 47, DS: 6, DSE: 0.3, DG: 11, B: 14.8 | ||
 | 626107-1015-105 | Cone receiver | Styli | M5 system Thread, Titaniumium, DGE: 11, LE: 15, weight: 13 g | |
| 626103-6180-002 | Cone receiver | Styli | Holds M3 XXT styli Thread Adapter, Titaniumium, DGE: 5, LE: 7, weight: 0.55 g | ||
| 625006-3081-000 | Contour stylus arm | Styli | For contour stylus tip for measurements in deep grooves d=3mm; L=178.5mm; L2=52mm; for CONTOURECORD... | ||
| 625006-9147-000 | Contour stylus arm for contour stylus tip and T-type | Styli | Contour stylus tip for general purpose measurement d=3mm L=242,5mm; for SURFCOM NEX 030/040 (ACCRETE... | ||
| 625006-3338-000 | Contour stylus arm for contour stylus tip for distant general purpose measurement | Styli | d=3mm; L=528.5mm; L2=52mm; for CONTOURECORD 1600/1700 (ACCRETECH 010 2808) | ||
| 625006-9427-000 | Contour stylus arm for contour stylus tip for distant general purpose measurement | Styli | d=3mm L=592,5mm; for SURFCOM NEX 030/040 (ACCRETECH DM83512) | |
| 625006-3396-000 | Contour stylus arm for contour stylus tip for distant general purpose measurement inside | Styli | d=2mm; L=529mm; L2=13mm; for CONTOURECORD 1600/1700 (ACCRETECH 010 2810) | ||
| 625006-9431-000 | Contour stylus arm for contour stylus tip for distant general purpose measurement inside | Styli | d=2mm L=592,5mm; for SURFCOM NEX 030/040 (ACCRETECH DM83514) | |
| 625006-3335-000 | Contour stylus arm for contour stylus tip for general purpose measurement | Styli | d=3mm; L=178.5mm; L2=26mm; for CONTOURECORD 1600/1700 (ACCRETECH 010 2800) | ||
| 625006-4097-000 | Contour stylus arm for contour stylus tip for general purpose measurement | Styli | d=3mm L=178,5mm;L2=26mm; for CONTOURECORD 1710/2600/2700 (ACCRETECH DM45528) | ||
| 000000-1794-623 | Contour stylus arm for contour stylus tip for measurements in deep grooves | Styli | d=3mm L=178,5mm;L2=52mm; for CONTOURECORD 1710/2600/2700 (ACCRETECH DM45531) | ||
 | 625006-3336-000 | Contour stylus arm for contour stylus tip for measurements inside | Styli | d=2mm; L=179mm;L2=13mm; for CONTOURECORD 1600/1700 (ACCRETECH 010 2801) | |
| 625006-4098-000 | Contour stylus arm for contour stylus tip for measurements inside | Styli | d=2mm L=179mm;L2=13mm; for CONTOURECORD 1710/2600/2700 (ACCRETECH DM45529) | ||
 | 625006-9225-000 | Contour stylus arm for contour stylus tip for measurements inside | Styli | d=2mm L=242,5mm; for SURFCOM NEX 030/040 (ACCRETECH DM83507) | |
| 625006-4099-000 | Contour stylus arm for stylus arm extensions and offset stylus arm extensions | Styli | L=115mm L2=17mm; for CONTOURECORD 1710/2600/2700 (ACCRETECH DM45530) | ||
 | 625006-3271-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=0.7; d=3mm; L1=60mm; L2=52mm; for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX 030/040 f... | |
 | 625006-3272-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=0.7 d=3mm;L1=34mm;L2=26mm; for CONTOURECORD 1600/1700/1710/2600/2700/SURFCOM NEX 030/040 for stylu... | |
| 625006-3273-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=0.7; d=2mm; L1=21mm; L2=13mm; for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX 030/040 f... | |
| 625006-3274-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=1; d=3mm; L1=60mm; L2=52mm; for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX 030/040 for... | |
| 625006-3275-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=1; d=2mm; L1=21mm; L2=13mm; for CONTOURECORD 1600/1700/1710/2600/2700/ and SURFCOM NEX 030/040 for... | |
| 625006-3119-000 | Contour stylus tip sphere for measurements with high precision | Styli | D=0,5 d=3mm;L1=21mm;L2=13mm; for CONTOURECORD 1710/2600/2700 for stylus arm DM45733 (ACCRETECH DM455... | ||
| 626105-6270-003 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 26.4, D: 25, weight: 100 g | ||
| 626105-6270-004 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 13.5, D: 25, weight: 50 g | ||
| 626105-6270-005 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 19.95, D: 25, weight: 75 g | ||
| 626105-6270-006 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 39.3, D: 25, weight: 150 g | ||
| 626105-6270-007 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 522, D: 25, weight: 200 g | ||
| 626105-6270-009 | Counterweight for stylus systems | Styli | M5 threaded pins, stainless steel, L: 7.3, D: 25, weight: 25 g | ||
| 626103-6270-000 | Counterweight for stylus systems | Styli | M3 threaded pins, stainless steel, L: 7.4, D: 7, weight: 2 g | ||
| 626103-6270-001 | Counterweight for stylus systems | Styli | M3 threaded pins, stainless steel, L: 10.69, D: 7, weight: 3 g | ||
| 600341-8002-000 | Cube | Styli | M5, Titaniumium, B: 20, weight: 32 g | ||
| 600341-8361-000 | Cube | Styli | M5, Titaniumium, B: 20, weight: 13 g | ||
 | 626115-6110-001 | Cube | Styli | M5 thread, Titaniumium with headless screw, B: 15, weight: 13 g | |
| 626115-6110-003 | Cube | Styli | M5 thread, Titaniumium with headless screw, B: 15, weight: 13 g | |
| 602030-8362-000 | Cube | Styli | M5 thread, aluminum, B: 15, weight: 20 g | ||
| 602030-8363-000 | Cube | Styli | M5 thread, aluminum, B: 15, weight: 7.9 g | ||
| 626107-6280-070 | Cube with cone adapter | Styli | M5 thread, Titaniumium, DG: 11, LE: 17, B: 15, weight: 13 g | ||
| 626115-6110-002 | Cube with cone and countersink | Styli | M5 thread, Titaniumium, B: 15, weight: 13 g | ||
 | 626115-0029-050 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: 5,0, DS: 3.5, L: 50, ML: 40.0, ... | |
| 626115-0129-053 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: 5,0, DS: 3.5, L: 53, ML: 43.0, ... | |
| 626115-0029-064 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: 8,0, DS: 6, L: 63.5, ML: 50.5, ... | |
| 626115-0129-043 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: .,0, DS: 1.5, L: 43, ML: 33 | |
| 626115-0029-017 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: 1.5, DS: 1, L: 17, ML: 7 | |
| 626115-0029-058 | Diamond!Scan mono | Styli | thread M5, tungsten carbide shaft, diamondcoated sphere, DG: 11, DK: 2, DS: 4, DSE: 1.5, L: 58, ML: ... | |
| 626115-5000-598 | Diamond!Scan mono L-stylus | Styli | M5, tungsten carbide shaft, diamond-coated sphere, DK: 0.5, L: 55.5, ML: 25.5, DS: 6, MLE: 2.19, DSE... | ||
| 626115-0429-022 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 1.35, L: 22, ML: 12, DS: 1, DG: 11 | ||
| 626115-0429-032 | Diamond!Scan mono stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.8, L: 32, ML: 32, DS: 1, MLE: 4.8,... | ||
| 626115-0129-022 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.3,... | ||
| 626115-0129-024 | Diamond!Scan mono stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.5, L: 24, ML: 14, DS: 1, MLE: 2.5,... | ||
| 626115-0129-032 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.3,... | ||
| 626115-0129-033 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.5... | ||
| 626115-0129-040 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 40, ML: 30, DS: 3, DG: 11 | ||
| 626115-0129-050 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 50, ML: 40, DS: 3, DG: 11 | ||
| 626115-0129-058 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.5... | ||
| 626115-0129-075 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 75, ML: 65, DS: 3, DG: 11 | ||
| 626115-0129-100 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 100, ML: 90, DS: 3, DG: 11 | ||
| 626115-0129-115 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 10, L: 115, ML: 102, DS: 6, DG: 11 | ||
| 626115-0129-150 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 10, L: 150, ML: 125, DS: 6, DG: 11 | ||
| 626115-0129-200 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 10, L: 200, ML: 175, DS: 6, DG: 11 | ||
| 626115-0329-022 | Diamond!Scan mono stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.8, L: 22, ML: 12, DS: 1, MLE: 4.8,... | ||
| 626115-0329-044 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 2.5,... | ||
| 626115-0329-058 | Diamond!Scan mono stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 6, L: 58, ML: 48, DS: 3.5, MLE: 4.8,... | ||
| 626115-0329-075 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 10, L: 75, ML: 62, DS: 6, DG: 11 | ||
| 626115-0329-100 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 10, L: 100, ML: 87, DS: 6, DG: 11 | ||
| 626115-0529-032 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 1.35, L: 32, ML: 22, DS: 1, DG: 11 | ||
| 626115-0229-022 | Diamond!Scan mono stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.5,... | ||
| 626115-0229-033 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 33, ML: 23, DS: 3, DG: 11 | ||
| 626115-0229-044 | Diamond!Scan mono stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 1.5, L: 44, ML: 34, DS: 4, MLE: 19, ... | ||
| 626115-0229-058 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 4, L: 58, ML: 48, DS: 3, DG: 11 | ||
| 626115-0229-075 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 6, L: 75, ML: 65, DS: 3.5, DG: 11 | ||
| 626115-0229-100 | Diamond!Scan mono stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 6, L: 100, ML: 90, DS: 3.5, DG: 11 | ||
| 626115-0819-058 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 58, ML: 45, DS: 6, DG: 11 | ||
| 626115-0819-064 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 63.5, ML: 50.5, DS: 6, DG:... | ||
| 626115-0819-075 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 75, ML: 62, DS: 6, DG: 11 | ||
| 626115-0819-100 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 100, ML: 87, DS: 6, DG: 11 | ||
| 626115-0819-115 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 114.5, ML: 101, DS: 6, DG:... | ||
| 626115-0819-130 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 130, ML: 117, DS: 6, DG: 1... | ||
| 626115-0819-200 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 200, ML: 187, DS: 6, DG: 1... | ||
| 626115-0819-225 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 8.05, L: 225, ML: 200, DS: 6, DG: 1... | ||
| 626115-0109-022 | Diamond!Scan stylus with thread | Styli | M5, steel thread adapter, stepped, tungsten carbide shaft, diamond sphere, DK: 1, L: 22, ML: 12, DS:... | ||
| 626115-0109-024 | Diamond!Scan stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond sphere, DK: 1, L: 24, M... | ||
| 626115-0109-032 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, stepped, tungsten carbide shaft, diamond sphere, DK: 1, L: 32,... | ||
| 626103-0309-033 | Diamond!Scan stylus with thread | Styli | M3 XXT, Titaniumium alloy thread adapter, straight, ThermoFit shaft, diamond sphere, DK: 3, L: 33, M... | ||
| 626103-0309-040 | Diamond!Scan stylus with thread | Styli | M3 XXT, Titaniumium alloy thread adapter, straight, ThermoFit shaft, diamond sphere, DK: 3, L: 40, M... | ||
 | 626103-0309-050 | Diamond!Scan stylus with thread | Styli | M3 XXT, Titaniumium alloy thread adapter, straight, ThermoFit shaft, diamond sphere, DK: 3, L: 50, M... | |
| 626115-0309-025 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 25... | ||
| 626115-0309-033 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 33... | ||
| 626115-0309-036 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 36, ML: 26, DS: 2, DG: 11 | ||
| 626115-0309-050 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 50... | ||
| 626115-0309-058 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 58... | ||
| 626115-0309-064 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 64... | ||
| 626115-0309-075 | Diamond!Scan stylus with thread | Styli | M5, stainless steel thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 75, ... | ||
| 626115-0309-090 | Diamond!Scan stylus with thread | Styli | M5, Titaniumium alloy thread adapter, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 90... | ||
| 626115-0310-075 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 75, ML: 65, DS: 2, DG: 11,... | ||
| 626115-0311-058 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 58, ML: 48, DS: 2, DG: 11,... | ||
| 626115-0319-025 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 25, ML: 15, DS: 2, DG: 11,... | ||
| 626115-0319-033 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 33, ML: 23, DS: 2, DG: 11,... | ||
| 626115-0319-034 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 33.5, ML: 23.5, DS: 2, DG:... | ||
| 626115-0319-040 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 40, ML: 30, DS: 2, DG: 11,... | ||
| 626115-0319-050 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 50, ML: 40, DS: 2, DG: 11,... | ||
| 626115-0319-058 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 58, ML: 48, DS: 2.5, DG: 11, weight:... | ||
| 626115-0319-064 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 64, ML: 54, DS: 2, DG: 11,... | ||
| 626115-0319-075 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond sphere, DK: 3, L: 75, ML: 65, DS: 2, DG: 8 | ||
| 626115-0319-085 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 85, ML: 75, DS: 2, DG: 11,... | ||
| 626115-0319-100 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 3.05, L: 100, ML: 90, DS: 2, DG: 11... | ||
| 626113-0109-019 | Diamond!Scan stylus with thread | Styli | M3 XXT, stepped, tungsten carbide shaft, diamond sphere, DK: 1, L: 19, ML: 10, DS: 1, MLE: 5.1, DSE:... | ||
| 626113-0109-020 | Diamond!Scan stylus with thread | Styli | M3 XXT, stepped, tungsten carbide shaft, diamond sphere, DK: 1, L: 20, ML: 11, DS: 1, MLE: 5, DSE: 0... | ||
| 626115-0329-032 | Diamond!Scan stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 0.5,... | ||
| 626115-0519-033 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 33, ML: 23, DS: 3.5, DG: 11 | ||
| 626115-0519-040 | Diamond!Scan stylus with thread | Styli | straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 40, ML: 30, DS: 3.5, DG: 11 | ||
| 626115-0519-050 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 50, ML: 40, DS: 3.5, DG: 1... | ||
| 626115-0519-053 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 53, ML: 43, DS: 3.5, DG: 11 | |
| 626115-0519-058 | Diamond!Scan stylus with thread | Styli | straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 58, ML: 48, DS: 3.5, DG: 11 | |
| 626115-0519-075 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 75, ML: 65, DS: 3.5, DG: 1... | |
| 626115-0519-100 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 5.05, L: 100, ML: 90, DS: 3.5, DG: ... | ||
| 626113-0209-030 | Diamond!Scan stylus with thread | Styli | M3 XXT, straight, tungsten carbide shaft, diamond sphere, DK: 2, L: 30, ML: 21, DS: 1.5, DG: 5, weig... | ||
| 626113-0209-034 | Diamond!Scan stylus with thread | Styli | M3 XXT, straight, tungsten carbide shaft, diamond sphere, DK: 1, L: 30, ML: 21, DS: 1.5, DG: 5, weig... | ||
| 626115-0209-020 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond sphere, DK: 2, L: 20, ML: 9, DS: 1.5, DG: 11, weight: ... | ||
| 626115-0209-044 | Diamond!Scan stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond sphere, DK: 2, L: 44, ML: 34, DS: 4, MLE: 19, DSE: 1.5,... | ||
| 626115-0209-058 | Diamond!Scan stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond sphere, DK: 2, L: 58, ML: 48, DS: 4, MLE: 33, DSE: 1.5,... | ||
| 626115-0219-020 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 20, ML: 10, DS: 1.5, DG: 1... | ||
| 626115-0219-032 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 32, ML: 12, DS: 1.5, DG: 1... | ||
| 626115-0219-034 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 34, ML: 24, DS: 1.5, DG: 1... | ||
| 626115-0219-044 | Diamond!Scan stylus with thread | Styli | M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 44, ML: 34, DS: 4, MLE: 19,... | ||
| 626115-0219-030 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 30, ML: 20, DS: 1.5, DG: 1... | |
| 626115-0219-022 | Diamond!Scan stylus with thread | Styli | M5, straight, tungsten carbide shaft, diamond-coated sphere, DK: 2.05, L: 22, ML: 12, DS: 1.5, DG: 11 | |
| 626115-0229-032 | Diamond!Scan stylus with thread | Styli | M5, stainless steel thread adapter, stepped, tungsten carbide shaft, diamond sphere, DK: 2, L: 32, M... | ||
 | 626113-0209-051 | Diamond!Scan stylus with thread, M3 XXT, straight, tungsten carbide shaft, diamond sphere, DK: 1, L:... | Styli | | |
| 626115-0119-032 | Diamond!Scan stylus with thread, M5, stepped, tungsten carbide shaft, diamond-coated sphere, DK: 1.0... | Styli | |||
| 626115-3004-120 | Disc stylus with thread | Styli | M5, tungsten carbide shaft, ceramic disc, DK: 30, L: 120, ML: 107, DS: 8, DG: 11, B: 1 | |
| 626103-6110-002 | Double cube | Styli | M3 XXT thread, L: 13, B: 5, weight: 1 g | ||
| 626107-7000-163 | Double cube for adapter plate XTR | Styli | ThermoFit Pro | ||
| 000000-1251-674 | Extension | Styli | M5, Titaniumium, L: 30, DG: 11, weight: 12 g | ||
| 626107-1035-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 35, DG: 11, weight: 9 g | ||
| 626107-1040-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 40, DG: 11, weight: 9 g | ||
| 600341-8261-000 | Extension | Styli | M5, aluminum, L: 40, DG: 11, weight: 10 g | ||
| 626107-1050-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 50, DG: 11, weight: 10 g | ||
| 600341-8262-000 | Extension | Styli | M5, aluminum, L: 60, DG: 11, weight: 15 g | ||
| 600341-8263-000 | Extension | Styli | M5, aluminum, L: 80, DG: 11, weight: 19 g | ||
| 626107-1060-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 60, DG: 11, weight: 11 g | ||
| 600341-8264-000 | Extension | Styli | M5, aluminum, L: 100, DG: 11, weight: 24 g | ||
| 600341-8265-000 | Extension | Styli | M5, aluminum, L: 120, DG: 11, weight: 30 g | ||
| 626107-1070-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 70, DG: 11, weight: 11 g | ||
| 626107-1080-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 80, DG: 11, weight: 12 g | ||
| 600341-8420-000 | Extension | Styli | M5 thread, aluminum, L: 200, DG: 20, weight: 96 g | ||
| 626107-1090-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 90, DG: 11, weight: 13 g | ||
| 600341-8421-000 | Extension | Styli | M5, aluminum, L: 150, DG: 20, weight: 68 g | ||
| 600341-8422-000 | Extension | Styli | M5, aluminum, L: 100, DG: 20, weight: 50 g | ||
| 626107-1100-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 100, DG: 11, weight: 14 g | ||
| 600341-8423-000 | Extension | Styli | M5, aluminum, L: 80, DG: 20, weight: 43 g | ||
| 600341-8424-000 | Extension | Styli | M5, aluminum, L: 60, DG: 20, weight: 37 g | ||
| 600341-8425-000 | Extension | Styli | M5, aluminum, L: 40, DG: 20, weight: 32 g | ||
| 626107-1120-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 120, DG: 11, weight: 15 g | ||
| 626107-1150-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 150, DG: 11, weight: 17 g | ||
| 626107-1180-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 180, DG: 11, weight: 19 g | ||
| 626107-1200-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 200, DG: 11, weight: 21 g | ||
| 626107-1250-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 250, DG: 11, weight: 24 g | ||
| 626107-1300-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 300, DG: 11, weight: 27 g | ||
| 626107-1350-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 350, DG: 11, weight: 29 g | ||
| 626107-1400-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 400, DG: 11, weight: 34 g | ||
| 626107-1450-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 450, DG: 11, weight: 39 g | ||
| 626107-2050-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 50, DG: 20, weight: 28 g | ||
| 626107-2060-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 60, DG: 20, weight: 29 g | ||
| 626107-2070-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 70, DG: 20, weight: 30 g | ||
| 626107-2075-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 75, DG: 20, weight: 31 g | ||
| 626107-2080-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 80, DG: 20, weight: 32 g | ||
| 626107-2090-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 90, DG: 20, weight: 33 g | ||
| 626107-2100-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 100, DG: 20, weight: 34 g | ||
| 626107-2120-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 120, DG: 20, weight: 37 g | ||
| 626107-2150-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 150, DG: 20, weight: 41 g | ||
| 626107-2180-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 180, DG: 20, weight: 45 g | ||
| 626107-2200-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 200, DG: 20, weight: 48 g | ||
| 626107-2250-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 250, DG: 20, weight: 55 g | ||
| 626107-2300-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 300, DG: 20, weight: 62 g | ||
| 626107-2400-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 400, DG: 20, weight: 75 g | ||
| 626107-2500-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 500, DG: 20, weight: 89 g | ||
| 626107-2600-100 | Extension | Styli | M5 thread, ThermoFit Silver, L: 600, DG: 20, weight: 107 g | ||
| 602030-8301-000 | Extension | Styli | M3 thread, stainless steel, L: 10, DG: 4, weight: 1 g | ||
| 602030-8302-000 | Extension | Styli | M3 thread, stainless steel, L: 20, DG: 4, weight: 1 g | ||
| 602030-8303-000 | Extension | Styli | M3 thread, stainless steel, L: 30, DG: 4, weight: 2 g | ||
| 602030-8304-000 | Extension | Styli | M3 thread, stainless steel, L: 40, DG: 4, weight: 3 g | ||
| 602030-8305-000 | Extension | Styli | M3 thread, stainless steel, L: 50, DG: 4, weight: 4 g | ||
| 602030-8321-000 | Extension | Styli | M2 thread, stainless steel, LE: 5, DGE: 3, weight: 0.2 g | ||
| 602030-8322-000 | Extension | Styli | M2 thread, stainless steel, LE: 10, DGE: 3, weight: 0.5 g | ||
| 602030-8323-000 | Extension | Styli | M2 thread, stainless steel, LE: 20, DGE: 3, weight: 1 g | ||
 | 626117-2010-030 | Extension | Styli | M5 thread, Titaniumium, L: 10, DG: 18, weight: 10 g | |
| 602030-8324-000 | Extension | Styli | M2 thread, stainless steel, LE: 30, DGE: 3, weight: 1 g | ||
 | 626117-2015-030 | Extension | Styli | M5 thread, Titaniumium, L: 15, DG: 18, weight: 15 g | |
| 602030-8325-000 | Extension | Styli | M2 thread, stainless steel, LE: 40, DGE: 3, weight: 2 g | ||
 | 626117-4060-201 | Extension | Styli | M3 thread, stainless steel, L: 60, DG: 4, weight: 5.5 g | |
| 626117-4070-300 | Extension | Styli | M3 thread, Titaniumium, L: 70, DG: 4, weight: 3.9 g | |
| 626117-4080-202 | Extension | Styli | M3 thread, stainless steel, L: 80, DG: 4, weight: 7.5 g | |
| 626103-5020-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 20, DGE: 5, weight: 1.2 g | ||
| 626103-5030-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 30, DGE: 5, weight: 1.3 g | ||
| 626103-5040-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 40, DGE: 5, weight: 1.4 g | ||
| 626103-5045-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 45, DGE: 5, weight: 1.4 g | ||
| 602030-9044-000 | Extension | Styli | M5 thread, Titaniumium, L: 10, DG: 11, weight: 3.7 g | ||
| 626103-5050-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 50, DGE: 5, weight: 1.5 g | ||
| 602030-9045-000 | Extension | Styli | M5 thread, Titaniumium, L: 15, DG: 11, weight: 6 g | ||
| 602030-9046-000 | Extension | Styli | M5 thread, Titaniumium, L: 20, DG: 11, weight: 7 g | ||
| 626103-5060-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 60, DGE: 5, weight: 1.7 g | ||
| 602030-9047-000 | Extension | Styli | M5 thread, Titaniumium, L: 25, DG: 11, weight: 9.6 g | ||
| 602030-9048-000 | Extension | Styli | M5 thread, Titaniumium, L: 25, DG: 18, weight: 26 g | ||
| 626103-5065-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 65, DGE: 5, weight: 1.7 g | ||
| 602030-9049-000 | Extension | Styli | M5 thread, Titaniumium, L: 40, DG: 11, weight: 14 g | ||
| 602030-9050-000 | Extension | Styli | M5 thread, Titaniumium, L: 40, DG: 18, weight: 43 g | ||
| 626103-5075-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 75, DGE: 5, weight: 1.7 g | ||
| 602030-9051-000 | Extension | Styli | M5 thread, Titaniumium, L: 50, DG: 11, weight: 15 g | ||
| 626103-5080-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 80, DGE: 5, weight: 1.8 g | ||
| 602030-9052-000 | Extension | Styli | M5 thread, Titaniumium, L: 50, DG: 18, weight: 35 g | ||
| 602030-9053-000 | Extension | Styli | M5 thread, Titaniumium, L: 60, DG: 11, weight: 14 g | ||
 | 626103-5090-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 90, DGE: 5 | |
| 602030-9054-000 | Extension | Styli | M5 thread, Titaniumium, L: 60, DG: 18, weight: 38 g | ||
| 626103-5100-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 100, DGE: 5, weight: 2 g | ||
| 602030-9055-000 | Extension | Styli | M5 thread, Titaniumium, L: 75, DG: 11, weight: 19 g | ||
| 602030-9056-000 | Extension | Styli | M5 thread, Titaniumium, L: 75, DG: 18, weight: 42 g | ||
| 626103-5105-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 105, DGE: 5, weight: 2.1 g | ||
| 602030-9057-000 | Extension | Styli | M5 thread, Titaniumium, L: 80, DG: 11, weight: 19 g | ||
| 626103-5130-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 50, DGE: 5, weight: 2.5 g | ||
| 602030-9058-000 | Extension | Styli | M5 thread, Titaniumium, L: 80, DG: 18, weight: 41 g | ||
| 626103-5140-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 140, DGE: 5, weight: 2.7 g | ||
| 602030-9059-000 | Extension | Styli | M5 thread, Titaniumium, L: 90, DG: 11, weight: 20 g | ||
| 602030-9060-000 | Extension | Styli | M5 thread, Titaniumium, L: 90, DG: 18, weight: 47 g | ||
| 602030-9061-000 | Extension | Styli | M5 thread, Titaniumium, L: 100, DG: 11, weight: 19 g | ||
| 602030-9062-000 | Extension | Styli | M5 thread, Titaniumium, L: 100, DG: 18, weight: 50 g | ||
| 602030-9063-000 | Extension | Styli | M5 thread, Titaniumium, L: 120, DG: 11, weight: 30 g | ||
| 602030-9064-000 | Extension | Styli | M5 thread, Titaniumium, L: 120, DG: 18, weight: 56 g | ||
| 602030-9065-000 | Extension | Styli | M5 thread, Titaniumium, L: 150, DG: 11, weight: 29 g | ||
| 602030-9066-000 | Extension | Styli | M5 thread, Titaniumium, L: 150, DG: 18, weight: 68 g | ||
| 602030-9067-000 | Extension | Styli | M5 thread, Titaniumium, L: 200, DG: 18, weight: 67 g | ||
| 602030-9068-000 | Extension | Styli | M5 thread, Titaniumium, L: 250, DG: 18, weight: 67 g | ||
| 602030-9069-000 | Extension | Styli | M5 thread, Titaniumium, L: 300, DG: 18, weight: 84 g | ||
| 626103-5150-000 | Extension | Styli | M3 XXT thread, ThermoFit, LE: 150, DGE: 5, weight: 2.7 g | ||
| 626107-6060-000 | Extension with cone receiver | Styli | Titaniumium , ThermoFit Pro, DGE: 11, LE: 25, weight: 13 g | ||
| 626107-1050-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 50, DG: 11, weight: 13 g | ||
| 626107-1060-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 60, DG: 11, weight: 14 g | ||
| 626107-1070-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 70, DG: 11, weight: 15 g | ||
| 626107-1080-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 80, DG: 11, weight: 15 g | ||
| 626107-1090-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 80, DG: 11, weight: 16 g | ||
| 626107-1100-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 100, DG: 11, weight: 17 g | ||
| 626107-1110-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 110, DG: 11, weight: 18 g | ||
| 626107-1130-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 130, DG: 11, weight: 19 g | ||
| 626107-1160-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 160, DG: 11, weight: 21 g | ||
| 626107-1190-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 190, DG: 11, weight: 24 g | ||
| 626107-1210-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 210, DG: 11, weight: 25 g | ||
| 626107-1260-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 260, DG: 11, weight: 29 g | ||
| 626107-1310-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 310, DG: 11, weight: 33 g | ||
| 626107-1410-105 | Extension with cone receiver | Styli | ThermoFit Silver, L: 410, DG: 11, weight: 40 g | ||
| 626107-4040-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 40, DGE: 11, weight: 17 g | ||
| 626107-4045-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 45, DGE: 11, weight: 16 g | ||
| 626107-4050-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 50, DGE: 11, weight: 17 g | ||
| 626107-4060-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 60, DGE: 11, weight: 17 g | ||
| 626107-4065-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 65, DGE: 11, weight: 18 g | ||
| 626107-4070-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 70, DGE: 11, weight: 18 g | ||
| 626107-4075-000 | Extension with cone Receiver | Styli | ThermoFit Pro, LE: 75, DGE: 11, weight: 18 g | ||
| 626107-4080-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 80, DGE: 11, weight: 19 g | ||
| 626107-4085-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 85, DGE: 11, weight: 20 g | ||
| 626107-4090-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 90, DGE: 11, weight: 20 g | ||
| 626107-4100-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 100, DGE: 11, weight: 20 g | ||
| 626107-4105-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 105, DGE: 11, weight: 21 g | ||
| 626107-4110-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 110, DGE: 11, weight: 21 g | ||
| 626107-4115-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 115, DGE: 11, weight: 20 g | ||
| 626107-4120-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 120, DGE: 11, weight: 22 g | ||
| 626107-4125-045 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 125, MLE: 45, DGE: 20, BE: 11, weight: 87 g | ||
| 626107-4130-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 130, DGE: 11, weight: 23 g | ||
| 626107-4135-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 135, DGE: 11, weight: 23 g | ||
| 626107-4150-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 150, DGE: 11, weight: 25 g | ||
| 626107-4150-090 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 150, MLE: 90, DGE: 20, BE: 11 | ||
| 626107-4155-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 155, DGE: 11, weight: 25 g | ||
| 626107-4160-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 160, DGE: 11, weight: 25 g | ||
| 626107-4165-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 165, DGE: 11, weight: 36 g | ||
| 626107-4165-045 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 165, MLE: 45, DGE: 20, BE: 11, weight: 87 g | ||
| 626107-4165-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 165, MLE: 105, DGE: 20, BE: 11, weight: 47 g | ||
| 626107-4170-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 170, DGE: 11, weight: 26 g | ||
| 626107-4180-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 180, DGE: 11, weight: 26 g | ||
| 626107-4190-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 190, DGE: 11, weight: 27 g | ||
| 626107-4190-090 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 190, MLE: 90, DGE: 20, BE: 11, weight: 53 g | ||
| 626107-4195-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 195, DGE: 11, weight: 28 g | ||
| 626107-4195-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 195, MLE: 105, DGE: 20, BE: 11, weight: 53 g | ||
| 626107-4200-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 200, DGE: 11, weight: 28 g | ||
| 626107-4205-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 205, MLE: 105, DGE: 20, BE: 11, weight: 53 g | ||
| 626107-4210-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 210, DGE: 11, weight: 29 g | ||
| 626107-4215-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 215, MLE: 155, DGE: 20, BE: 11, weight: 51 g | ||
| 626107-4220-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 220, DGE: 11, weight: 30 g | ||
| 626107-4230-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 230, DGE: 11, weight: 31 g | ||
| 626107-4235-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 235, DGE: 11, weight: 31 g | ||
| 626107-4240-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 240, DGE: 11, weight: 32 g | ||
| 626107-4245-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 245, DGE: 11, weight: 31 g | ||
| 626107-4245-045 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 245, MLE: 45, DGE: 20, BE: 11 | ||
| 626107-4250-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 250, DGE: 11, weight: 32 g | ||
| 626107-4255-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 255, MLE: 105, DGE: 20, BE: 11, weight: 60 g | ||
| 626107-4255-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 255, MLE: 155, DGE: 20, BE: 11, weight: 57 g | ||
| 626107-4260-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 260, DGE: 11, weight: 32 g | ||
| 626107-4265-065 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 265, MLE: 65, DGE: 20, BE: 11, weight: 64 g | ||
| 626107-4265-205 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 265, MLE: 205, DGE: 20, BE: 11, weight: 54 g | ||
| 626107-4270-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 270, DGE: 11, weight: 32.7 g | ||
| 626107-4275-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 275, MLE: 155, DGE: 20, BE: 11, weight: 60 g | ||
| 626107-4285-085 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 285, MLE: 85, DGE: 20, BE: 11, weight: 66 g | ||
| 626107-4300-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 300, DGE: 11, weight: 36 g | ||
 | 626107-4305-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 305, MLE: 105, DGE: 20, BE: 11, weight: 68 g | |
| 626107-4305-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 305, MLE: 155, DGE: 20, BE: 11, weight: 64 g | |
| 626107-4305-205 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 305, MLE: 205, DGE: 20, BE: 11, weight: 60 g | |
 | 626107-4310-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 310, DGE: 11, weight: 36 g | |
| 626107-4315-065 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 315, MLE: 65, DGE: 20, BE: 11, weight: 72 g | ||
| 626107-4325-205 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 325, MLE: 205, DGE: 20, BE: 11, weight: 63 g | ||
| 626107-4335-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 335, DGE: 11, weight: 36 g | ||
| 626107-4335-035 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 335, MLE: 35, DGE: 20, BE: 11, weight: 70 g | ||
| 626107-4335-085 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 335, MLE: 85, DGE: 20, BE: 11, weight: 73 g | ||
| 626107-4350-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 350, DGE: 11, weight: 36 g | ||
| 626107-4355-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 355, MLE: 105, DGE: 20, BE: 11, weight: 75 g | ||
| 626107-4355-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 355, MLE: 155, DGE: 20, BE: 11, weight: 71 g | ||
| 626107-4355-205 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 355, MLE: 205, DGE: 20, BE: 11, weight: 68 g | ||
| 626107-4355-255 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 355, MLE: 255, DGE: 20, BE: 11, weight: 64 g | ||
| 626107-4365-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 365, DGE: 11, weight: 36 g | ||
| 626107-4365-065 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 365, MLE: 65, DGE: 20, BE: 11, weight: 79 g | ||
| 626107-4375-255 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 375, MLE: 255, DGE: 20, BE: 11, weight: 67 g | ||
| 626107-4385-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 385, DGE: 11, weight: 38 g | ||
| 626107-4385-085 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 385, MLE: 85, DGE: 20, BE: 11, weight: 81 g | ||
| 626107-4405-105 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 405, MLE: 105, DGE: 20, BE: 11, weight: 82 g | ||
| 626107-4405-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Silver, LE: 405, MLE: 155, DG: 20, weight: 79 g | ||
| 626107-4405-205 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 405, MLE: 205, DGE: 20, BE: 11, weight: 75 g | ||
| 626107-4405-255 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 405, MLE: 255, DGE: 20, BE: 11, weight: 71 g | ||
| 626107-4410-000 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 410, DGE: 11, weight: 44 g | ||
| 626107-4420-090 | Extension with cone receiver | Styli | ThermoFit | ||
| 626107-4445-165 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 445, MLE: 165, DGE: 20, BE: 11, weight: 83 g | ||
| 626107-4450-050 | Extension with cone receiver | Styli | ThermoFit Pro, LE: 450, DGE: 20, BE: 11, weight: 92 g | ||
| 626107-4455-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 455, MLE: 155, DGE: 20, BE: 11, weight: 85 g | ||
| 626107-4460-400 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 460, MLE: 400, DGE: 20, BE: 11, weight: 60 g | ||
| 626107-4465-065 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 465, MLE: 65, DGE: 20, BE: 11, weight: 94 g | ||
| 626107-4465-155 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 465, MLE: 155, DGE: 20, BE: 11, weight: 86 g | ||
| 626107-4465-165 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 465, MLE: 165, DGE: 20, BE: 11, weight: 87 g | ||
| 626107-4485-085 | Extension with cone receiver | Styli | Stepped, ThermoFit Pro, LE: 485, MLE: 85, DGE: 20, BE: 11, weight: 95 g | ||
| 626103-5025-000 | Extension, | Styli | M3 XXT thread, ThermoFit, LE: 25, DGE: 5, weight: 1.2 g | ||
| 626109-9120-000 | FixAssist VAST linear | Styli | Incl. tool kit, probe system alignment device FixAssist VAST linear, to hold an MT/VAST probe change... | ||
| 626109-9160-000 | FixAssist XTR linear, incl. tool kit, probe system alignment device including tool kit, (attention: ... | Styli | |||
| 626109-9140-200 | FixAssist XXT | Styli | Including S1, KT, and W1 adapters, plus tooling needed for assembly and adjustment of M3 XXT stylus ... | ||
| 626109-9231-200 | GEAR RT Accessories for VAST XXT TL3 | Styli | |||
| 626105-6280-070 | Knuckle joint | Styli | M5, threaded, bending, Titaniumium, L: 36.5, DG: 20, weight: 44 g | ||
| 626112-5000-003 | Knuckle joint | Styli | M2, threaded, rotating, stainless steel, L: 13, DG: 3.5, B: 6, weight: 1.1 g | ||
| 626112-5000-004 | Knuckle joint | Styli | Rotating, M2 thread, stainless steel, L: 21, DG: 3.5, weight: 2.1 g | ||
| 600342-9002-000 | Knuckle joint | Styli | M5, threaded, bending, Titaniumium, L: 30, DG: 11, weight: 11 g | ||
| 626103-6180-001 | Knuckle joint | Styli | M3 XXT, clampable, rotating, Titaniumium, L: 10, weight: 1.6 g | ||
| 626103-6180-021 | Knuckle joint | Styli | M3 XXT thread, bending, Titaniumium, L: 12 | ||
| 602030-9101-000 | Knuckle joint | Styli | M2, threaded, rotating, stainless steel, L: 8, B: 4.5, weight: 1 g | ||
| 602030-9102-000 | Knuckle joint | Styli | M3, threaded, rotating, stainless steel, L: 12, weight: 3 g | ||
| 602030-9105-000 | Knuckle joint | Styli | M2, L: 16.5, weight: 2 g | ||
 | 626103-0307-030 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 3, L: 30, ML: 18, DS: 2... | |
| 626103-0307-040 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 3, L: 40, ML: 28, DS: 2... | |
| 626103-0307-050 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 3, L: 50, ML: 38, DS: 2... | ||
| 626103-0507-040 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 5, L: 40, ML: 30, DS: 3... | ||
| 626103-0507-050 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 5, L: 50, ML: 40, DS: 3... | ||
| 626103-0507-075 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 5, L: 75, ML: 65, DS: 3... | ||
| 626103-0207-020 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 2, L: 20, ML: 8, DS: 1,... | ||
| 626103-0207-025 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 2, L: 25, ML: 13, DS: 1... | ||
| 626103-0207-030 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 2, L: 30, ML: 18, DS: 1... | ||
| 626103-0807-040 | Knurled stylus with thread | Styli | M3 XXT thread, Titaniumium thread adapter, ThermoFit shaft, ruby sphere, DK: 8, L: 40, ML: 30, DS: 3... | ||
 | 626103-0030-416 | L - Stylus | Styli | M3 XXT, Cube, tungsten carbide shaft, ruby sphere, DK: 0.3, B: 8, L: 4, ML: 2.3, DS: 1, DSE: 0.2, DG... | |